Victron SmartSolar MPPT 150/100-Tr VE.Can

• Battery Voltage: 12/24/48  Auto Select (Software tool needed to select 36V)
• Rated Charge Current: 100A
• Nominal PV Power 12V: 1450W
• Nominal PV Power 24V: 2900W
• Max. PV Short Circuit Current: 5800A
• Maximum PV Open Circuit Voltage: 150V absolute maximum coldest conditions 145V start-up and operating maximum
• Efficiency: 98%
• Charge Algorithm: Multi-stage adaptive (eight preprorammed algorithms) or user defined algorithm
• Data Communication Port: VE.Direct VE.CCan and Bluetooth
• IP Rating: IP43 (electronic components) IP22 (connection area)
• Dimensions: H216 x W295 x D103mm
• Weight (kg): 4.5
• Warranty: 5 Years

MPPT: Ultra Fast Maximum Power Point Tracking
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12 24 or 48V battery bank with current ranging from 70 to 100A depending on the model.

The charge settings are fully programmable and can even be set up for different battery chemistries like lead-acid lithium and others.

Control Your Charger Remotely

The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up management and at-a-glance information such as battery voltage and current PV voltage and current and historical data.

Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.

When connected to each other all individual VE.Can SmartSolar chargers will synchronise their charge stages. They can also send their data via a single cable to a GX monitoring device.

Remote Monitoring and Control
If the GX device is connected to the internet the Victron Remote Management Portal (VRM) provides access to the full power of your solar charger(s).

SmartSolar Control Display
The VE.Can SmartSolar charger is also equipped with a VE.Direct port like our other MPPT solar chargers. This port can be for single unit monitoring or for streetlight control. The remote on/off connector can be externally controlled by a third-party device like a lithium battery. An optional plug-in LCD display/control provides live-data set-up and management straight from the face of the device.

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs two or more maximum power points (MPP) may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%.

Flexible charge algorithm

Fully programmable charge algorithm and eight pre-programmed algorithms selectable with a rotary switch (see manual for details).

Extensive electronic protection

Over-temperature protection and power derating when temperature is high.

PV short circuit and PV reverse polarity protection.

PV reverse current protection.

Bluetooth Smart built-in

The wireless solution to set-up monitor update and synchronise SmartSolar Charge Controllers.

Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

VE.Can: the multiple controller solution

Up to 25 units can be synchronised with VE.Can

VE.Direct or VE.Can

For a wired data connection to a Color Control GX other GX products PC or other devices

Remote on-off

To connect for example to a VE.BUS BMS.

Programmable relay

Can be programmed to trip on an alarm or other events.

Optional: SmartSolar pluggable LCD display

Simply remove the rubber seal that protects the plug on the front of the controller and plug-in the display.