792-CYR010230430

Victron Cyrix-Li-Charge Intelligent Charge Relay 12/24V - 230A

  • Regular price £194.95


  • Voltage: 12/24v
  • continuous current & Breaking capacity at 12V or 24V: 230A
  • Current Consumption When Open: 4 mA
  • Control Cable Included (Length 1 m): Yes
  • LED Status Indication: Yes
  • Protection Category: IP54
  • Dimensions: 65 x 100 x 50mm
  • Weight: 0.27kG
  • Warranty: 5 Years
<a class=\"pagebuilder-button-primary\" href=\"https://www.victronenergy.com/upload/documents/Datasheet-Cyrix-Li-ion-120-A-EN.pdf\" target=\"_blank\" style=\"text-align: center; font-weight: normal;\"> <i class=\"fas fa-file-alt\"></i> <span data-element=\"link_text\" style=\"font-weight: 600;\"> Datasheet</span> </a>

The Cyrix-Li-Charge will connect a battery charger with 3 seconds delay:

  • if the charge disconnect output of the VE.Bus BMS is high and
  • if it senses 13.0 V (resp. 26.0 V) or more on its battery charger connection terminal and
  • if it senses 2 V or more on its battery terminal
    (the Cyrix will remain open if not connect to the battery)

The Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating signalling cell over voltage or cell over temperature.

In general a cell over voltage alarm will reset shortly after charging has been stopped. The Cyrix will then reconnect the charger after a delay 3 seconds

When the Cyrix-Li-Charge is engaged (charger connected to battery) it will disengage after 1 hour to check if the charger is still enabled..

If after the Cyrix has disengaged the output of the battery charger immediately increases to 13.0 V or more the Cyrix will reengage with a 3 seconds delay.

Note: In case of zero discharge current or a small discharge current the Cyrix will not disengage shortly after the charger has been switched off and/or disconnected because battery voltage will remain higher than 13.5 V.


Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)