The tight to the tank streamlining makes buoyancy control more precise. The wing shape adds stability due to reduced air migration and attention to the ideal balance for easy expert trim.
When diving in currents you want to reduce drag for ease of finning. When exploring swim throughs in a wreck or reef you want to be free of entanglement. This is where you will truly value the NX ZEN’s design.
LESS IS MORE
The ZEN wing is deliberately narrow so that it does not protrude from the side of your tank. This brings advantages in enhancing your buoyancy control, in reducing any entanglement hazards and in significantly reducing drag. As we reduce drag we usually improve our gas consumption, enabling longer and safer dives.
ZEN wing provides 19kg of lift, while its size is comparable to classic wings with 17kg of lift.
SMALLER UPPER WING SECTION
The compact engineering of the NX series inflator has allowed a reduction in the required size of the upper part of the wing. This results in a position at the surface that lifts you high out of the water and ensures lift is in the right place when submarged.
PRECISE CONTROL OF GAS MOVEMENT
Traditional inflation systems are mounted on the side, so that as gas is injected it can disturb trim if you are in a good flat position.
The compact nature of the NX series adapter allows it to be placed dead centre, eliminating unwanted gas movement. Air is added and is immediately distributed equally down both sides of the wing, leaving you in perfect trim.
FINALLY - AN ERGONOMIC BACKPLATE
The classic backplates' design history dates back to what could be cut out of an old road sign. For the first time since then we have looked properly at the ergonomics and anatomy of a diver's back. Our redesign has created a plate that is better in every respect.
Enlarging the upper part of the backplate has achieved better weight distribution during the dive and removes load from the lumbar region. The lower plate design spreads the load comfortably, safely allowing for the optimal attachment of weight pockets and accessories.
The new NX Series backplate is comfortable, stable and protective of your back.
PERFECT 3D MESH PAD AS STANDARD
ZEN, as with any other set from the NX Series is equipped with XDEEP’s perfect 3D Mesh lining.
This soft but non compressive pad adds to your comfort, whether in board shorts or drysuit. It helps prevent any small movement of the back plate against your back, adding to stability and security.
The 3D Mesh material does not need any additional lead due to the smart materials technology that allow easy water penetration and drainage.
V-SHAPED CROTCH STRAP
The NX Series harness is equipped with totally new V shaped crotch strap. The V shape is more comfortable, eliminating the single strap design running directly between the legs. Whether walking with your gear to jump in or scootering around a reef, you will feel the very direct benefit.
IMPROVED COMFORT AT THE SURFACE
The V-shaped crotch strap distributes load over a larger area, allowing you to sit comfortably into the crotch strap whilst at the surface.
IMPROVED STABILITY WHILST DIVING
The V is formed by two attachment points at the bottom of the back plate. This ensures there is an even tension preventing sideways slippage of the system and spreading the load for stability.
TWO EASY ACCESS CARGO D-RINGS
The NX Series V-strap is equipped with two Cargo D-Rings instead of the usual one. The design results in the D rings being set off to each side as opposed to a traditional centre ring, providing easier access to clipped off gear.
EASIER TO PUT ON AND TAKE OFF
The backplate design has resulted in major improvements in donning and doffing the system.
When the harness is unfastened, the shoulder straps are 20% longer than in a classic harness. This creates more room even if you have restricted movement in the shoulders. Tightening the buckle of the waist strap pulls the shoulder straps snugly down, perfectly tensioning the harness fit to your body. No need to adjust for changes from wetsuit to drysuit. The whole system is comfortably held closer to your body stabilising the entire scuba unit.
MODULAR WEIGHT SYSTEM
To truly be at one with your equipment, your weight system must be perfectly balanced, be secure and easy to configure and use. The modular weight system in the NX series means you can confine your weight belt to history.
Tailor your weight distribution for the diving you are doing. From a couple of kilos needed in the warm sun, to the extra lead needed in cold water diving, you can select the pockets that best suit your needs.
Be a part of the worldwide
NX Series community on Facebook
Join the NX Series community on Facebook. You can interact here with some of the world’s top instructors, divers and with other like-minded people, all of whom are happy to share their experiences and expertise.
Pick up advice, ideas and see some of the amazing dives people are doing on the NX Series gear.