Vitcas Fire Cement in Black (1250°C / 310ml) BFC-310ML

Vitcas Black Fire Cement is a smooth paste which sets rock hard when exposed to the air. The BFC fire cement is for domestic and commercial applications, with excellent adhesion to fire bricks, fire grates, flue pipes, flue bricks, boilers, blockwork, stone, clay-ware and most metals and is resistant up to 1250°C (2282°F). Vitcas BFC-310ML is ideal for minor repair work, such as cracks less than 5mm in length, and seals to form smoke- and gas-tight joints. This fire-resistant sealant black and comes supplied in a 310ml tube.

Suitability:
• Sealing visible metal to metal joints
• Sealing visible joints between flue pipes & stoves in conjunction with stove rope
• Installing or repairing ranges, fireplaces, ovens & boilers
• Assembling cast iron stove, cookers & ranges

Consistency: Mastic
Indoor: Yes
Ready to Use: Yes
Drying Time: 12h at +20°C (+68°F)

Coverage guide for 310ml cartridge:
Bead Diameter / Approximate Length
4mm = 18 metres
6mm = 8 metres
8mm = 5 metres
10mm = 3 metres

How to apply Vitcas Fire Cement:
Ensure the area is clean and that all dirt, dust, rust and grease is removed. Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Dampen the surface where the material is to be applied. Apply using a cartridge gun (sold separately). The material will set at room temperature, but the time will be reduced by lighting the fire or applying heat, gradually increasing over a 4 hour period. After curing, any fine cracks that may appear in the cement should be filled with the same material to ensure an air tight seal.