{"product_id":"racor-seal-service-kit-for-racor-900-1000ma-series","title":"Racor Seal Service Kit for Racor 900 \u0026 1000MA Series","description":"\u003cp\u003eRK11-1404 complete seal service kit for the following Racor fuel filters, from the Racor marine turbine series:\u003c\/p\u003e\n\n\u003cp\u003e- Racor 900MA\u003cbr\u003e\n- Racor 903MA\u003cbr\u003e\n- Racor 1000MA\u003cbr\u003e\n- Racor 1003MA\u003c\/p\u003e\n\n\u003cp\u003eThis seal kit contains the following spares:\u003c\/p\u003e\n\n\u003cp\u003e- RK11004 T-handle O-ring\u003cbr\u003e\n- 11003 Nylon Washer\u003cbr\u003e\n- Rubber Seal\u003cbr\u003e\n- RK11007 Lid Seal\u003cbr\u003e\n- RK11007 Bowl Seal\u003cbr\u003e\n- 11036 O-ring\u003cbr\u003e\n- RK 15010B Check Ball Kit\u003cbr\u003e\n- Drain Gasket\u003cbr\u003e\n- 43506 Feed through or plug O-ring\u003cbr\u003e\n- Water Probe \/ Plug O-ring\u003cbr\u003e\n- Drain Seal\u003cbr\u003e\n- Drain Body O-ring\u003cbr\u003e\n- Drain O-ring\u003c\/p\u003e\n\n\u003cp\u003eInstallation Instructions:\u003c\/p\u003e\n\n\u003cp\u003eTear down is performed in numerical order shown. Rebuild unit in reverse order, replace old parts with new as applicable.\u003c\/p\u003e\n\n\u003cp\u003eCompletely drain the assembly.\u003c\/p\u003e\n\n\u003cp\u003e1. Remove T-handle and o-ring.\u003c\/p\u003e\n\n\u003cp\u003e2. Remove lid and lid gasket. On rebuild, lubricate gasket with diesel fuel or motor oil prior to installation.\u003c\/p\u003e\n\n\u003cp\u003e3. Remove all four cap screws.\u003c\/p\u003e\n\n\u003cp\u003e4. Remove bowl ring. Metal bowls do not have bowl ring.\u003c\/p\u003e\n\n\u003cp\u003e5. Remove bowl and bowl gasket. On rebuild, lubricate gasket with diesel fuel or motor oil prior to installation.\u003c\/p\u003e\n\n\u003cp\u003e6. Remove centrifuge by turning counter-clockwise. Conical baffle will come off with centrifuge.\u003c\/p\u003e\n\n\u003cp\u003e7. Remove existing checkball seal. On rebuild, bevel on checkball seal points up into housing and flat side faces checkball.\u003c\/p\u003e\n\n\u003cp\u003e8. Remove existing checkball.\u003c\/p\u003e\n\n\u003cp\u003e9. With razor blade cut away existing gasket from drain. On rebuild, lubricate gasket with diesel fuel or motor oil prior to installation. Note: For FG assemblies using drain kits RK 11780 or RK 30488, see steps 12 or 13. Marine assemblies see step 14.\u003c\/p\u003e\n\n\u003cp\u003e10. Remove heater feedthru or feedthru plug and o-ring. On rebuild, lubricate o-ring with diesel fuel or motor oil prior to installation.\u003c\/p\u003e\n\n\u003cp\u003e11. Remove water probe or bowl plug and o-ring. On rebuild, lubricate o-ring with diesel fuel or motor oil prior to installation.\u003c\/p\u003e\n\n\u003cp\u003e12. Remove drain from bowl. Unscrew drain stem from drain body. Remove existing o-rings and drain seal (finger). On rebuild, lubricate drain seal (finger) and o-rings with diesel fuel or motor oil prior to installation. To install drain seal, pull finger up thru drain body using pliers; clip off tip.\u003c\/p\u003e\n\n\u003cp\u003e13. With razor blade cut away existing gasket from drain. Remove o-ring. On rebuild, lubricate gasket and o-ring with diesel fuel or motor oil prior to installation.\u003c\/p\u003e\n\n\u003cp\u003e14. Remove drain fitting and heat deflector from bowl. Remove existing o-ring and drain gasket. On rebuild, lubricate o-ring with diesel fuel or motor oil prior to installation.\u003c\/p\u003e","brand":"Racor","offers":[{"title":"Default Title","offer_id":57811689898365,"sku":"RAC-RK11-1404","price":82.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0631\/0199\/3204\/files\/rac-rk11-1404.jpg?v=1771004514","url":"https:\/\/waterworldsports.co.uk\/products\/racor-seal-service-kit-for-racor-900-1000ma-series","provider":"waterworldsports.co.uk","version":"1.0","type":"link"}